NEUFACE F1

Face Recognition Terminal with Body Temperature Detection System

 

NeuFace F1 face recognition terminal is a kind of access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.

 

Hightlights

 

✓ Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%.

 

✓ Supports Vanadium Oxide uncooled sensor to measure target's temperature.

 

✓ Contact-less, Hygiene & High Speed Detection.

 

✓ 6,000 face capacity, 6000 card capacity, and 100,000 event capacity.

 

✓ Multiple authentication modes.

 

✓ Face mask wearing alert.

 

✓ IP Rating 65.

 

Face Recognition

 

✓ Recognition distance: 0.5 to 1.5 m

 

✓ Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc.

 

✓ Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software

 

✓ Suggested height for face recognition: between 1.4 m and 1.9 m.

 

✓ Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out.

 

✓ Watchdog design and tamper function

 

✓ Audio prompt for authentication result

 

✓ NTP, manually time synchronization, and auto synchronization

 

✓ Imports and export data to the device from the client software Access Control Terminal

 

Body Temperature Detection

 

Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C.

 

✓ Fast temperature measurement mode: Detects face and takes temperature without identity authentication.

 

✓ Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid/failed.

 

✓ Forced mask wearing alert: Configurable enable/disable force mask features.

 

✓ Displays temperature measurement results on the authentication page.

 

✓ Triggers voice prompt when detecting abnormal temperature.

 

✓ Configurable door status (open/close) when detecting abnormal temperature

 

 

Access Control Terminal

✓ Connects to external access controller or Wiegand card reader via Wiegand protocol.

 

✓ Support all kind of access control system including glass/wooden door access, tripod turnstile, swing gate, flap barrier, vehicle arm barrier system.

 

✓ Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed.

 

✓ Antipass back module (Optional)